Flow restrictor valves
The flow restrictor valves allow the adjustment of the flow by a restriction of the main pipe. The exceeding fluid is downloaded by the relief valve that is always installed on the inlet pipe.
They are responsible then of an energy dissipation and heat increasing that could suggest to install a heat exchanger, to limit the max. temperature of the fluid.
They are recommended when the excess of flow is very limited or in low frequency application. Otherwise the use of pressure compensated flow regulator is suggested.
CODE
Description
Max press.
Body material
Conn.
L/min
Click to enlarge image
A110200.01.00
A110200.02.00
A110300.01.00
A110300.02.00
A110400.01.00
A110400.02.00
One way flow restrictor valve
Zinc plated steel
350 Bar
G1/4"
G3/8"
G1/2"
20lpm
40lpm
60lpm
A110600.01.00
A110800.01.00
One way flow restrictor valve
Zinc plated steel
350 Bar
G3/4"
G1"
120lpm
240lpm
A110210.01.00
A110310.01.00
A110410.01.00
Bidirectional flow restrictor
Zinc plated steel
350 Bar
G1/4"
G3/8"
G1/2"
20lpm
40lpm
60lpm
A110610.01.00
A110810.01.00
Bidirectional flow restrictor
Zinc plated steel
350 Bar
G3/4"
G1"
120lpm
240lpm
A110200.10.00
One way flow restrictor valve
Zinc plated steel
400 Bar
G1/4"
3lpm
A110200.11.00
A110200.12.00
A110200.13.00
A110200.14.00
A110200.15.00
A110200.16.00
A110200.17.00
A110200.18.00
One way flow restrictor valve
Zinc plated steel
350 Bar
G1/4"
10lpm
A110400.11.00
One way flow restrictor valve
Zinc plated steel
350 Bar
G1/2"
70lpm
COPYRIGHT HBS SRL sales@hbsvalves.com