Valves for motors
The overcenter valves are employed to control the stop and the motion of one direction of an actuator (single overcenter valves) or both the directions (dual overcenter valves).
Functions:
- load lowering control: the lowering of the load is possible only if there is a pilot pressure from the other line; this operation ensures the oil supply of the cylinder preventing cavitation problems;
- containing of the pressure at the setting value, pressure relief for any pressure peaks caused by shocks or overloads; - arrest of the flow (and of the load) when the pump is not working or the directional valve is in neutral position;
- free flow for load lifting, with reduced pressure drops;
They consist of a body where are placed:
- check valve: it allows the flow in only one direction;
- pilot piston: it permits to control the gradual opening of the relief valve;
- relief valve: it permits to limit the maximum pressure in the actuator, it withholds the load and controls its lowering during the opening of the valve by the pilot signal.
CODE
L/min
Description
Max press.
Body material
Conn.
Pilot
Click to enlarge image
A060481.08.00
120lpm
Single overcentervalve for hydraulic motors inline
Zinc plated steel
500 Bar
1/2"SAE
6000
4:1
A060881.01.00
350lpm
Single overcentervalve for hydraulic motors inline
Zinc plated steel
500 Bar
1"SAE
6000
6:1
B060671.01.00
120lpm
Single overcentervalve for hydraulic motors inline
DANFOSS OMS, OMSW, OMSS
Aluminum
350 Bar
4:1
B060491.03.00
60lpm
Single overcentervalve for hydraulic motors inline
DANFOSS OMR,OMP
Aluminum
350 Bar
8.75:1
B060381.12.00
55lpm
Single overcentervalve for hydraulic motors inline
DANFOSS OMP
Aluminum
350 Bar
4.25:1
B060481.12.00
80lpm
Single overcentervalve for hydraulic motors inline
DANFOSS OMS
Aluminum
350 Bar
4.25:1
A060481.10.00
50lpm
Single overcentervalve for hydraulic motors inline
DANFOSS AMR, OMP WHITE SERIES HS,HP
Zinc plated steel
350 Bar
4.25:1
A070361.51.00
A070361.52.00
A070461.51.00
A070461.52.00
45lpm
60lpm
Dual overcenter for hydraulic motor.
Zinc plated steel
500 Bar
G3/8"
G1/2"
4.3:1
11:1
4.3:1
11:1
B070381.22.00
4.2:1
40lpm
Dual overcentervalve for hydraulic motors flangeable DINAMICOIL
Aluminum
350 Bar
G3/8"
B070481.33.00
60lpm
Dual overcentervalve for hydraulic motors flangeable DANFOSS OMR OMP
Aluminum
350 Bar
G1/2"
4.2:1
B070481.22.00
60lpm
Dual overcentervalve for hydraulic motors flangeable DINAMICOIL
Aluminum
350 Bar
G1/2"
4.2:1
B070481.25.00
60lpm
Dual overcentervalve for hydraulic motors flangeable DINAMICOIL
Aluminum
350 Bar
G1/2"
4.2:1
B070481.26.00
60lpm
Dual overcentervalve for hydraulic motors flangeable DINAMICOIL
Aluminum
350 Bar
G1/2"
4.2:1
B070481.27.00
60lpm
Dual overcentervalve for hydraulic motors flangeable DANFOSS OMS OMSW OMSS
Aluminum
350 Bar
G1/2"
4.2:1
B070481.28.00
60lpm
Dual overcentervalve for hydraulic motors flangeable DANFOSS OMR OMP and WHITE HS HP
Aluminum
350 Bar
G1/2"
4.2:1
B070481.30.00
60lpm
Dual overcentervalve for hydraulic motors flangeable DANFOSS OMS OMSW OMSS
Aluminum
350 Bar
G1/2"
4.2:1
B070481.32.00
60lpm
Dual overcentervalve for hydraulic motors flangeable SAM HYDRAULIK
Aluminum
350 Bar
G1/2"
4.2:1
B070481.35.00
60lpm
Dual overcentervalve for hydraulic motors flangeable SAM HYDRAULIK MB1010
Aluminum
350 Bar
G1/2"
4.2:1
B070481.38.00
60lpm
Dual overcentervalve for hydraulic motors flangeable DANFOSS OMS
Aluminum
350 Bar
G1/2"
4.2:1
A070481.41.00
60lpm
Dual overcentervalve for hydraulic motors flangeable DANFOSS OMR and OMP
Zinc plated steel
350 Bar
G1/2"
4.2:1
B070481.31.00
60lpm
Dual overcentervalve for hydraulic motors flangeable DANFOSS OMS
Aluminum
350 Bar
G1/2"
4.2:1
B070381.26.00
55lpm
Dual overcentervalve for hydraulic motors flangeable DANFOSS OMP
Aluminum
350 Bar
G3/8"
4.2:1
B070481.50.00
60lpm
Dual overcentervalve for hydraulic motors flangeable DANFOSS OMS/OMS OMSS
Aluminum
350 Bar
G1/2"
4.2:1
B070481.43.00
60lpm
Dual overcentervalve for hydraulic motors flangeable
Aluminum
210 Bar
G1/2"
11:1
A078281.03.00
A078281.02.00
A078281.07.00
150lpm
300lpm
Dual overcentervalve for hydraulic motors flangeable
Zinc plated steel
420 Bar
3/4"SAE6000
1"SAE6000
4:1
8:1
6:1
A078481.06.00
A078481.03.00
300lpm
Dual overcentervalve for hydraulic motors flangeable
Zinc plated steel
350 Bar
1"SAE6000
11/4" SAE6000
8:1
A078281.01.00
A078481.01.00
A078481.05.00
A078581.01.00
A078581.01.00
120lpm
300lpm
Dual overcentervalve for hydraulic motors flangeable
Zinc plated steel
350 Bar
3/4"SAE6000
1"SAE6000
11/4" SAE6000
4:1
4.5:1
COPYRIGHT HBS SRL sales@hbsvalves.com